MADRIX PLEXUS Manuel d'utilisateur télécharger pdf (Page 18)

Pin Assignment Available Settings

1 Ground

2 Port 1 Digital Input, Digital Output, Analog Input

3 Port 3 Digital Input, Digital Output, Analog Input

4 Port 5 Digital Input, Digital Output, Analog Input

5 Port 7 Digital Input, Digital Output

6 Port 9 Digital Input, Digital Output

7 Power 5V, 100mA max. (shared with Pin 9)

8 Ground

9 Power 5V, 100mA max. (shared with Pin 7)

10 Port 2 Digital Input, Digital Output, Analog Input

11 Port 4 Digital Input, Digital Output, Analog Input

12 Port 6 Digital Input, Digital Output, Analog Input

13 Port 8 Digital Input, Digital Output

14 Port 10 Digital Input, Digital Output

15 Ground

Extension Port – Remote Control

The MADRIX

PLEXUS features a

15-pin serial connector with

individually addressable ports. The

extension port makes it possible to

connect external analog or digital

devices for remote control. In MADRIX

, please open the menu ‘Preferences’

à ‘PLEXUS Configuration…’ à ‘Extension Ports’ to configure each port

individually for the corresponding PLEXUS Configuration.

Extension

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15

Web Server – Remote Control

The PLEXUS provides an integrated web server. Connect your PLEXUS and the

remote device accessing the PLEXUS to a network. Open a web browser and

type in the IP address of your PLEXUS. The IP address can be found and changed

in the PLEXUS menu ‘Settings’ à ‘Network’. Once loaded, the page will show

an interactive illustration of your device for remote control.

Please note: Make sure to use one and the same network and check if the

settings of the operating system and the settings of the PLEXUS are correct.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

MADRIX PLEXUS Manuel d'utilisateur Page 18